The toolset eighty five components with 1/4” and 1/2” inch ratchet and sockets from four millimeters to thirty two millimeters in CR-V quality. An integral part of the toolset are diagonal, long nose, and water pipe pliers. The side wrench set from six to twenty seven millimeters, screwdriver set, hammer, chisels, five meters long measure tape, and knife are found in the toolset as well. Tool components are placed in the plastic case with ergonomic handle which is smartly located on one side only. This way guarantees that the case can be open on the proper side and the components does not spread out.
- Included contents:
- 1x Combination Plier 7"
- 1x Long Nose Plier 6"
- 1x Water Pump Plier 10"
- 2x Screwdriver 6x 100mm
- 1x Driver Handle
- 8x Open End Wrench: 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 18, 19, 20, 22, 24, 27mm
- 1x Knife 18mm with 3 Blades
- 1x Measuring Tape 5m x 16FT
- 16x 1/2" Dr. Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm
- 2x Flipper Ratchet Handle: 1/4" Dr. & 1/2" Dr.
- 2x 1/2"Dr. Extention Bar: 5" & 10"
- 1x 3 Way Adaptor: 1/2" x 3/8"
- 2x Universal Joint: 1/4" Dr. & 1/2" Dr.
- 2x 1/2" Dr. Spark Plug Socket: 16 & 21mm
- 12x 1/4"Dr. Socket: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm
- 1x Coupler
- 6x 1/4" Dr. Deep Socket: 9, 10, 11, 12, 13mm
- 1x 1/4" Dr. Extention Bar 3"
- 1x 1/4" Dr. Sliding Bar
- 1x Hammer 300g
- 20x Bits x 25mm with Holder
- 2x Punch (Point And Flat Chisel)
| Broj dijelova |
dps.attribute.pocet_dilu_v_sade.85_ks |